Telephone us on Walsall 01922 626 664 Or Nottingham 0115 939 6061
Trade Counter open for customer collections Mon - Fri 8.00am to 3.00pm
Trade Counter open for customer collections Mon - Fri 8.00am to 3.00pm
Call us (Walsall) 01922 626664/625451 or (Nottingham) 0115 939 6061 Email web@castletis.co.uk
Trade Counter open for customer collections Mon - Fri 8.00am to 3.00pm
Trade Counter open for customer collections Mon - Fri 8.00am to 3.00pm
Cleaners
There are 9 products.CLEANERS
An important element for any successful bonding application is the need to have a clean surface to start with. If you're bonding together products but there’s surface dust, grease or moisture present, it is likely that the adhesion will fail. So don't skip this crutial step.
Castle TIS supplies a range of products to aid surface preparation ready for either tape or adhesive bonding including cleaners from leading brands such as 3M and Permabond.
-
3M™ Scotch-Grip™ Solvent No 1, 1 Litre
3M™ Scotch-Grip™ Solvent No 1, 1 Litre Specifications Clean 3M™ Fastbond™ products with Solvent 1. This Solvent is a blend of Toluene and Commercial Heptane and can be used for cleaning up excess adhesives from parts and equipment. Please refer to product data sheet for further information Available in 1 litre container Please refer to product...
-
3M™ VHB™ Surface Cleaner Sachets
3M™ VHB™ Surface Cleaner Sachets Easy to use, disposable wipes Degreases surfaces prior to bonding Use in conjunction with 3M™ VHB™ Tape (and many other tapes) Units per 1 box (100) Please refer to product data sheet for further information (contact us for further assistance)
-
Permabond Cleaner A- 400ml
Permabond Cleaner A-400ml Isopropanol-based spray cleaner Ideal for cleaning parts before bonding - removes grease and grime. Please refer to product data sheet for further information (contact us for further assistance)
-
3M™ Graphic Remover System (1 Litre bottle)
3M3M™ Graphic Remover System pH-neutral almost colourless liquid Free from aromatic hydrocarbons To assist in the removal of 3M Graphic Films and of most screen printed PSA Units per 1 Litre Please refer to product data sheet for further information
-
Permabond A905 Surface Activator (1 Litre)
Permabond A905 anaerobic surface activator The A905 is designed to allow non-metallic surfaces to be bonded / sealed It accelerates the cure rate of anaerobics Improves bonding to contaminated surfaces Unit per 1 Litre Please refer to product data sheet for further information
-
tesa 62992 Alcohol Wipe
tesa 62992 Alcohol Wipe Specifications Removes grease and surface contaminants to aid bonding Individually packed 100 wipes per box Please refer to product data sheet for further information
-
3M™Industrial Cleaner Citrus Base 500ml
71001783383M™3M™Industrial Cleaner Citrus Base (500ml Aerosol) Helps dissolve and remove dirt, grease, tar and much more for a wide variety of industrial uses Removes glue without damaging the underlying surface in may cases Use to remove grease from surfaces before gluing Heavy-duty degreaser / cleaner wipes away with just a shop towel after use...
-
3M™ VHB™ Surface Cleaner (1 Litre Bottle)
3M™ VHB™ Surface Cleaner Cleans and degreases surfaces prior to bonding Use in conjunction with 3M™ VHB™ Tapes (and any other tapes) The 3M™ VHB™ surface cleaner can be applied ondifferent smooth materials like metals, plastics or paintedsurfaces; however, compatibility should be checked beforehand. Units per 1 bottle Please refer to product...
-
3M™ 3M™Industrial Cleaner Citrus Base 200ml Aerosol
3M™Industrial Cleaner Citrus Base (200ml Aerosol) Heavy duty cleaner/degreaser that works effectively on difficult toremove substances such as many dried, non-curing adhesives, tape residues, grease, oils and dirt. The cleaner is based on a citrus oil and does not contain chlorinated compounds or petroleum distillate solvents. The cleaner emulsifies...