Telephone Walsall 01922 626 664 Or Nottingham 0115 939 6061
Call us (Walsall) 01922 626664/625451 or (Nottingham) 0115 939 6061 Email web@castletis.co.uk
3M™ Fast Tack Water Based Adhesive 1000NF, Clear Neutral x 18.9 litres
- One part product (no activator required)
- Water-dispersed, high-solids content
- Handling strength without forced drying equipment
- Bonds to a variety of substrates
- High performance - ideal for laminating/foam bonding, trim attachment etc
- Also available in purple & for larger users bulk sizes
Unit 4 per box
Please refer to product data sheet for further information
Volume discounts
| Choose quantities at checkout | Discount | You Save |
|---|---|---|
| 2 | 2.5% | Up to £ 12.46 |
| 4 | 5% | Up to £ 49.82 |
3M™ Fast Tack 1000NF Water Based Adhesive is a unique, water-based adhesive specially designed to deliver an effective combination of fast, heat resistant bonding, repositionability, and high ultimate strength. The adhesive is non-flammable, polychloroprene-free, and has zero VOCs.
One-surface application
3M™ Fast Tack 1000NFWater Based Adhesive bonds quickly while achieving handling strength in approximately one minute or less. Along with its fast action, the potential for one-surface application also increases productivity while using less product.
Adheres to Many Materials
By formulating an adhesive that is 48% solids, 3M™ Fast Tack 1000NF Water Based Adhesive provides up to three times more coverage than solvent based adhesives. It adheres to many types of flexible foam, latex foams, fabric, polyester fiberfill, canvas, wood, plywood, particleboard, and many plastic and metal surfaces. It is certified to GREENGUARD® Product Emission Standard For Children and Schools for low-emitting interior building materials.
Recommended Applications
- High-temperature insulation applications
- Pipe wrapping
- Acoustical Insulation installation
- Architectural and decorative paneling
- Moulded foam bonding
Whether it is being sprayed, brushed or rolled on, the application of your 3M™ adhesive is a straightforward process. Start by carefully applying your adhesive to your surface until you've formed a uniform coat. Using an overlapping pattern, the application of one coat should prove sufficient for most surfaces. Effective adhesive coverage is accomplished when 80% or more of the surface is covered. Some substrates, including porous materials, may require an additional coat. In order to apply additional adhesive, simply wait until the existing adhesive becomes dry to the touch, and then proceed with the application of the additional coat.
