AV305 Low Tack Protection Tape

Protected materials:

Bare metals: Cold rolled stainless steel, Zinc, Aluminium, Anodized aluminium

Pre-coated metals: Polyester (PES), Polyvinylidene fluoride (PVDF), Plastisol, Skinplates

Plastics : Polycarbonate (PC), Polymethyl methacrylate (Acrylic), Polyethylene terephtalate glycol (PETG), Polyvinyl chloride (PVC), Polystyrene (PS), Acrylonitrile butadiene styrene (ABS) Styrene acrylonitrile (SAN) - Acrylonitrile styrene acrylate (ASA), Polyethylene (PE) - Polypropylene (PP)

Profiles: White PVC, PVC with a decorative sheet, Painted Aluminium, PVC boards

Decorative laminates: Standard, Metallic finish


State of surface: Smooth / glossy, Lightly Structured / Semi Matt, Embossed Matt.
LAMINATION:The protective film must be applied to a clean and dry surface with the aid of a laminating machine. The protective film can be applied manually if it had been validated before. The film must be applied without bubbles and without excessive tension.
Elongation of the film during lamination should be < 1.0%
Recommended application / removal temperature between 15°C / 59°F and 50°C / 122°F.
It is not advisable to use on copper, brass and alloys containing copper. Adhesive side should not be exposed to direct sun light


Also suitable for use on many powder coat painted surfaces

Samples available for testing/evaluation upon request. It is the users responsibility to determine suitability of the product for the intended application.