Permabond
There are 18 products.PERMABOND
Permabond's range of adhesives includes: Anaerobic threadlockers, pipe sealants, retainers and gasket makers, Cyanoacrylate instant adhesives, Structural Acrylic, Epoxy and Polyurethane, - two-part and one-part heat cure adhesives, MS-Polymer based adhesives and UV-Cure adhesives.
-
NewPermabond C737 Cyanoacrylate Adhesive Black 50g
Permabond 737 Cyanoacrylate Adhesive 50g Good gap fill (up to 0.5mm / 0.02”) Toughened and flexible Ease of use –no mixing or heat cure Black -so suitable for dark surfaces 100% reactive, no solvents Also available in 20g bottle Units per 1 bottle. Please refer to product data sheet for further information
-
New
Permabond C792 Cyanoacrylate Adhesive 50g
Permabond C792 Cyanoacrylate Adhesive 50g Extremely fast setting Rapid development of high strength Ease of use-no mixing or heat cure Surface insensitive 100% reactive, no solvents Also available in 20g bottle Units per 1 bottle. Please refer to product data sheet for further information
-
New
Permabond TA4204 Toughened Acrylic Adhesive 400 ML Plus...
Permabond TA4204 Toughened Acrylic adhesive x 400 ml Adhesion to a wide variety of substrates Fastcure at room temperature Can be used with or without nozzle - supplied with 1 nozzle free of charge/cartridge High shear and peel strength Good impact strength Good chemical resistance Crystal clear appearance Bonds well to unprepared aluminium...
-
Permabond TA4204 Toughened Acrylic Adhesive 50 ML Plus...
Permabond TA4204 Toughened Acrylic adhesive x 50 ml Cartridge Adhesion to a wide variety of substrates Fastcure at room temperature Can be used with or without nozzle - supplied with 1 nozzle free of charge/cartridge High shear and peel strength Good impact strength Good chemical resistance Crystal clear appearance Bonds well to unprepared...
-
Permabond A905 Surface Activator (1 Litre)
Permabond A905 anaerobic surface activator The A905 is designed to allow non-metallic surfaces to be bonded / sealed It accelerates the cure rate of anaerobics Improves bonding to contaminated surfaces Unit per 1 Litre Please refer to product data sheet for further information
-
Permabond C792 Cyanoacrylate Adhesive 20g
Permabond C792 Cyanoacrylate Adhesive 20g Extremely fast setting Rapid development of high strength Ease of use-no mixing or heat cure Surface insensitive 100% reactive, no solvents Also available in 50g bottle Units per 1 bottle. Please refer to product data sheet for further information
-
Permabond HM135 Anaerobic Retainer (Green)
Permabond HM135 adhesive Fast curing, medium viscosity anaerobic adhesive. Locking & sealing threads/ Retaining cylinderical components. Maximum torque strength on brass or plated brass components. Excellent temperature & chemical resistance. Green in colour Unit per bottle Please refer to product data sheet for further information
-
Permabond F202 Anaerobic Retainer
Permabond F202 Retainer Toughened Thixotropic Ideal when bonding dissimilar materials Good adhesion to copper and aluminium Improved fatigue life WRAS listed for contact with wholesome (potable) water Unit per 200ml bottle Please refer to product data sheet for further information
-
Permabond TA4202 Acrylic Adhesive x 400ml With Free...
Permabond TA4202 Acrylic Adhesive 400ml Cartridge Multi-purpose, 2 part structual acrylic adhesive It is a high strength, fast curing toughened acrylic adhesive Designed for the structural bonding of similar or dissimilar surfaces Use in conjunction with 400ml applicator and TA4202/400 mixing nozzles Fast cure Supplied with 1 free nozzle per...
-
Permaclean II 400ml Can
Permaclean II General purpose industrial cleaner for cleaning and degreasing surfaces Use on greasy or dirty surfaces, wiping with Permaclean II Aerosol spray Application Spray directly onto the surface to be cleaned then wipe off with clean cloth Please refer to product data sheet for further information (contact us for further assistance)
-
Permabond HH131 High Temperature Threadlocker (Red)
Permabond HH131 Threadlocker (High Temperature) Very high strength Rapid cure Suitable for use with non-ferrous metals High temperature resistance Excellent chemical resistance Red in colour WRAS listed for contact with wholesome (potable) water Please refer to product data sheet for further information
-
Permabond A1046 Anaerobic Retainer
Permabond A1046 Anaerobic Retainer Toughened Rapid cure Ideal when bonding dissimilar materials Improved fatigue life Green in colour Unit x 1 bottle Please refer to product data sheet for further information
-
Permabond A1044 Anaerobic Threadsealant
Permabond A1044 Anaerobic Threadsealant Instant low pressure seal Does not shred or dry out Excellent chemical resistance Good high pressure resistance WRAS listed for contact with wholesome (potable) water White in colour Unit per 1 bottle Please refer to product data sheet for further information
-
Permabond A130 Anaerobic Threadlocker Blue (50ml)
Permabond A130 Anaerobic Threadlocker Excellent chemical resistance Vibration resistant Lubricates threads for easier assembly Provides corrosion protection WRAS listed for contact with wholesome (potable) water Blue in colour Unit per 1 bottle 50ml bottle Please refer to product data sheet for further information
-
Double Bubble Epoxy Adhesive 3gm Sachet Kit
General purpose, 3 minutes, fast setting, two part epoxy resin adhesive Provides a long working life. It is ideal for bonding many types of material including wood, metals, glass, ceramics, stone, concrete and leather Comes complete with card mixing pallet, adhesive sachet and mixing stick Units per 1 box(50 sachets)
-
Permabond C737 Cyanoacrylate Adhesive Black 20g
Permabond 737 Cyanoacrylate Adhesive 20g Good gap fill (up to 0.5mm / 0.02”) Toughened and flexible Ease of use –no mixing or heat cure Black -so suitable for dark surfaces 100% reactive, no solvents Also available in 50g bottle Units per 1 bottle. Please refer to product data sheet for further information
-
Permabond C102 Cyanoacrylate Adhesive 3g
Permabond C102 Low viscosity cyanoacrylate adhesive 3g tube Plastic and rubber bonding Applications requiring fast fixturing Ease of use –no mixing or heat cure Bonds most materials 100% reactive, no solvents Also available in other sizes Units per 1 Please refer to product data sheet for further information
-
Permabond TA4202 Toughened Acrylic Adhesive x 50ml With...
Permabond TA4202 Toughened Acrylic Adhesive 50ml Cartridge Adhesion to a wide variety of substrates Fast cure at room temperature Can be used with or without nozzle- supplied with 1 free nozzle per cartridge High shear and peel strength Good impact strength Good chemical resistance Pink (part A), green (part B) in colour Also available in 400ml...