Walsall 01922 626 664 Nottingham 0115 939 6061
Walsall 01922 626 664 Nottingham 0115 939 6061
Permabond Surface Preparation
There are 3 products.PERMABOND SURFACE PREPARATION
Our surface preparation products are used to achieve a better, more reliable bond, especially on hard to bond surfaces like glass, powder coated metal and polyolefin low surface energy plastics.
For optimum adhesion it is important that the substrates to be bonded are free of any contamination from grease, dirt or dust before bonding. If you have any questions regarding any of our Primers or Cleaners get in touch with our experts by emailing - web@castletis.co.uk
-
NewPermabond CSA Activator 1 x 200ml Aerosol Spray
Permabond CSA Activator 1 x 200ml Aerosol Spray Specifications Use with all cyanoacrylate adhesives. Will speed-up cyanoacrylate cure or activate "acidic" surfaces to allow cyanoacrylate cure. Ideal for curing excess uncured adhesive outside of the joint. Helps increase gap fill ability of cyanoacrylate adhesives. Please refer to data sheet for...
-
Permabond A905 Surface Activator (1 Litre)
Permabond A905 anaerobic surface activator The A905 is designed to allow non-metallic surfaces to be bonded / sealed It accelerates the cure rate of anaerobics Improves bonding to contaminated surfaces Unit per 1 Litre Please refer to product data sheet for further information
-
Permaclean II 400ml Can
Permaclean II General purpose industrial cleaner for cleaning and degreasing surfaces Use on greasy or dirty surfaces, wiping with Permaclean II Aerosol spray Application Spray directly onto the surface to be cleaned then wipe off with clean cloth Please refer to product data sheet for further information (contact us for further assistance)