Adhesive Applicators & Mixing Nozzles
There are 15 products.
3M™ EPX Adhesive Applicator Gun c/w 2:1 plunger
3M™ EPX Adhesive Applicator GunUse 3M EPX applicator with all 3M EPX 50ml /45ml/37ml adhesives Metal frame construction Hand ratchet applicationl Comes with 2:1 plunger Can be used with 1:1 and 10:1 plungers sold separately Unit per 1 Applicator
-
3M™ 10:1 Plunger for 3M EPX Adhesives 45ML/48.5ML...
3M™ 10:1 plunger to be used specifically with 3M™ EPX applicator with 45ML and 48.5Ml cartridges Suitable for use with 3M adhesives DP8005, DP8405, DP8407 , DP8410 DP8805, DP8810 etc Units per 1 plunger
-
3M™ Mixing Nozzles for DP8005/38ml - 17 Element (Pack of 12)
The adhesive is extruded through a static mixing nozzle, which ensures that the two components are mixed together thoroughly every time The mixing nozzle can be adapted to extrude different bead diameters by cutting the tip Units per 1 pack(12 nozzles)
-
Static Mixing Nozzles - 7 Element (12 Nozzles Per Pack)
Static Mixing NozzlesTo be used with 3M™ DP801 & DP810 The adhesive is extruded through a static mixing nozzle, which ensures that the two components are mixed together thoroughly every time The mixing nozzle can be adapted to extrude different bead diameters by cutting the tipUnits per 1 pack(12 nozzles)
-
Static Mixing Nozzles - 21 Element (12 Nozzles Per Pack)
Static adhesive mixing nozzlesAdhesive is extruded through a static mixing nozzle, which ensures that the two components are mixed together thoroughly every time The mixing nozzle can be adapted to extrude different bead diameters by cutting the tip Units per 1 pack (12 nozzles)
-
21 Element Blue Quadro Nozzle (200/400ml)
Quadro 21 element mixing nozzle for use with 200/400ml adhesive. Can be used with 3M DP490 400ml. Unit per Nozzle
-
3M™ Jet Melt Quadrack Applicator HM (Hot Melt Temperature)
Applicator gun for use with 3M Quadrack Hot melt Jetmelt adhesives 240 Volt Non drip patented valve design Ergonomical design uses palm of hand to easily dispense adhesive Use with standard 3M Hot-melt temperature Jet-melt adhesives Units per 1 applicator
-
3M™ Jet Melt Quadrack Applicator LT (Low Temperature)
3M™ Jet Melt Quadrack Applicator-LT (Low Temperature)Applicator gun for use with 3M Low melt - jet melt adhesives 240 Volt Non drip patented valve design Use with 3M low temperature jetmelt adhesives Ergonomical design uses palm of hand to easily dispense adhesiveUnits per 1 applicator
- New
Easiflow Sealant gun (310ml cartridge)
Easiflow Sealant gun (310ml cartridge)Metal frame construction Manual use Compatible with most 310ml sealant cartridges
- New
3M™ EPX Adhesive Mixing Nozzle 10:1 orange For 45ml...
3M™ EPX Adhesive Mixing Nozzle 10:1 orange x 45ml cartridgeUse in conjuction with 3M adhesives 45ml cartridge DP8405/8407/8410/8805/8810/ Use to provide thorough mixing and precise placement of adhesive
- New
3M™ EPX Adhesive Mixing Nozzle 2:1/1:1 Green For 45ml...
3M™ EPX Adhesive Mixing Nozzle 2:1/1:1 Green For 45ml CartridgeUse in conjuction with 3M adhesives 45ml cartridge DP6310NS and DP6330NS Use to provide thorough mixing and precise placement of adhesive
- New
Manual Applicator Dispenser For Two Part Adhesives...
Two Part Adhesive Manual applicator dispenser (400ml Mixpac cartridges)For all variations of 400ml series Mixpac cartridges Mechanical Advantage 26:1 Side Loading Frame Case Hardened Wear Compensating Device Manual operation Suitable for High viscosity adhesives such as 3M DP490 Model reference Cox VBM MR 400X 2:1 400ml
- New
Air Powered Applicator Dispenser For Two Part Adhesives...
Two Part Adhesive Hand applicator dispenser (400ml Mixpac cartridges)For use with all variations of 400ml series Mixpac cartridges 400ml 1:1 Mixpac, 400ml 2:1 Mixpac, 400ml 4:1 Mixpac, 400ml 10:1 Mixpac 5.25kN (525kgf) thrust at 6.8 bar operating pressure Air powered for ease of application of adhesive Suitable for viscous adhesives inc 3M DP490...
- New
Packer 12mm Industrial Hot Melt Glue Gun
Economically priced blister packed tool Powered by a self-regulating PTC heater allowing an adhesive output of up to 1.8kg/hr. Tool weighs 450gms. Suitable for use with most Packer 12mm hot melt adhesive products Model reference P-912-ECO
- New
Packer 43mm Pneumatic Hot Melt Glue Gun
Packer 43mm Pneumatic Hot Melt Glue GunExtremely robust, all electric industrial glue gun Removable integral stand incorporating a nozzle spanner Powerful 300 watt cartridge heater Adhesive output up to 3.0kg/hr Model reference P543 Eco
Contact Us
If you would like more information about the products that we supply, please fill in the contact form below.
A member of our friendly team will be in touch soon.
A member of our friendly team will be in touch soon.
