Telephone Walsall 01922 626 664 Or Nottingham 0115 939 6061
For help or advice call us on Walsall 01922 626 664 or Nottingham 0115 939 6061
Primers & Adhesion Promoters
There are 10 products.PRIMERS & ADHESION PROMOTERS
We supply a range of Primers and Adhesion promoters from leading UK manufacturers including 3M, Permabond and tesa
Are you not sure which adhesive is best for your requirements? Then our team is here to help! Send your enquiry to - web@castletis.co.uk.
-
Permabond POP Polyolefin Primer 1 x 1 litre
Permabond POP Polyolefin Primer 1 x 1 litre Specifications Permabond POP Polyolefin Primer 1 x 50ml for use with cyanoacrylate For priming polyolefins (such as polypropylene, polyethylene, PTFE etc). Cost-effective, can be used instead of flame, corona and plasma treatment. Better workplace health and safety materials handling than...
-
Loctite 7455 Activator 150ml
Loctite 7455 Tak Pak Activator 150ml Specifications Loctite 7455 is a colorless, amine-based accelerator used to increase the cure speed of Loctite cyanoacrylate adhesives. Pre- or post-applied to the bond, it's well suited for post-application on cyanoacrylate adhesive to ensure rapid fixturing. Used for securing wires or coils to PCBs, tamper-proofing...
-
Permabond CSA Activator 1 x 200ml Aerosol Spray
Permabond CSA Activator 1 x 200ml Aerosol Spray Specifications Use with all cyanoacrylate adhesives. Will speed-up cyanoacrylate cure or activate "acidic" surfaces to allow cyanoacrylate cure. Ideal for curing excess uncured adhesive outside of the joint. Helps increase gap fill ability of cyanoacrylate adhesives. Please refer to data sheet for...
-
3M™ Adhesion Promoter 111
3M™ Adhesion Promoter 111 Alcohol based adhesion promoter Increased tape adhesion build rate at both normal and cooler temperatures For use on many painted and bare metal substrates. Clear after applied Verify each surface and paint formulation through testing before each application Please refer to product data sheet for further information...
-
tesa® 60152 Adhesion Promoter - PU/HPVC
tesa® 60152 Adhesion Promoter- PU/HPVC Improves the adhesion of tesa’s pressure-sensitive adhesive tape offering to polyurethane (PU) and hard polyvinyl chloride/PVC-U/rigid PVC (HPVC) It is recommended for our tesa® ACXplus product family UV-traceability 100ml tin Unit x 1 tin Please refer to product data sheet for further information
-
tesa® 60151 Adhesion Promoter - Glass
tesa® 60151 Adhesion Promoter- Glass Used to improve the adhesion of tesa's adhesive tape offering to glass substrates It is especially recommended for our ACXplus product family 100 ml tin Unit x 1 tin Please refer to product data sheet for further information
-
tesa® 60150 Adhesion Promoter - Universal
tesa 60150 Adshesion Promoter- Universal Used to improve the adhesion of tesa's adhesive tape offering to various substrates It is especially recommended for our ACXplus product family The UV-traceability allows easy quality control during the application process 100ml tin Unit x 1 tin Please refer to product data sheet for further...
-
3M™ VHB™ Silane Glass Primer (1 Litre) AP115
3M™ VHB™ Silane Glass Primer (1 Litre) AP115 Apply as a primer to bond to glass Combat moisture resistance on glass from adhesives Use with 3M™ VHB™ tape Units per 1 bottle. Please refer to product data sheet for further information
-
Permabond A905 Surface Activator (1 Litre)
Permabond A905 anaerobic surface activator The A905 is designed to allow non-metallic surfaces to be bonded / sealed It accelerates the cure rate of anaerobics Improves bonding to contaminated surfaces Unit per 1 Litre Please refer to product data sheet for further information
-
3M™ Primer 94
3M™ Tape Primer 94 Can be used to promote adhesion of 3M tapes to surfaces such polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, metal and painted metal surfaces. Use with 3M™ VHB™ tapes Supplied in 236ml and 3.78L tins Units per 1 can Please refer to product data sheet for further information